JungleSIM
JungleSIM T1H Climate Sensor
Controlling devices needs an S1M or C1H
To see the readings, the sensor alone is enough: in Wi-Fi mode it sends them straight to the app over your 2.4 GHz home Wi-Fi. As soon as JungleSIM should control a device by them (heater, mister, fan, pump or any other device), you need a controller: the S1M screen module or the C1H control hub.
Why pre-order?
- Pre-order price: 10 % off the regular price.
- First in line: yours ships as soon as it is ready, expected in December 2026.
- 10 % off your next order: your personal code comes with the order confirmation.
You pay now. We email you when your parcel is on its way.
Small business owner, no VAT charged (§ 6 Abs. 1 Z 27 UStG).
The T1H measures temperature and humidity inside the terrarium and sends the readings to your S1M or C1H controller without a cable. Its Sensirion SHT45 sensor keeps measuring reliably above 90 % humidity, where many cheaper sensors give up. It runs on a rechargeable battery that you charge over USB-C, and you can use several per terrarium.
Only want to see what is happening in your terrarium? Then the T1H alone is enough. In Wi-Fi mode it sends its readings straight to the JungleSIM app over your home Wi-Fi, every few hours, so the battery lasts for months. As soon as JungleSIM should control something, like a heater, mister, fan or any other device, you need an S1M or C1H. You can move the sensor from one mode to the other in the app at any time.
JungleSIM is the control side: controllers and sensors. It does not replace your lights, heaters, pumps, foggers or other devices; it switches the ones you already have through Shelly smart plugs.
At a glance
- Type
- T1H (temperature and humidity, generation 1)
- Use
- Climate sensor, one or more per terrarium
- Sensor
- Sensirion SHT45, made for high humidity
- Connection
- Wireless to the S1M or C1H, or in Wi-Fi mode straight to the app
- Wi-Fi mode
- For the readings only: no S1M or C1H needed, sends to the app over 2.4 GHz home Wi-Fi, set up in the app over Bluetooth. Controlling devices needs an S1M or C1H.
- Power
- Rechargeable battery, charges over USB-C
- Updates
- Over the air, through the S1M or C1H or over Wi-Fi
- Size
- 41.0 x 53.0 x 21.2 mm
In the box
- T1H sensor with battery, in its case
Shipping
We ship within the EU.
Downloads
Product safety
Made for the humid air inside a terrarium, but not waterproof: keep it out of direct spray and standing water, vents down, dust plug in the USB-C socket. Contains a rechargeable lithium battery: charge it only outside the terrarium, when dry, at 0-45 °C, with a CE-marked 5 V USB-C power supply to EN IEC 62368-1; don't puncture, crush or heat it, and stop using it if it swells. Contains a strong magnet: keep it 10 cm from pacemakers and away from small children. Connect heaters through their own thermostat. Not a toy (small parts). Don't open or modify it except to change the battery as the manual describes. Electrical devices and batteries don't belong in household waste.
- Manufacturer
- JungleVault (Lucas Bohunovsky)
Frauenstiftgasse 5/1/11 1210 Wien Österreich
contact@thejunglevault.com
thejunglevault.com