JungleSIMYourterrarium,onautopilot.
Temperature, humidity, light, rain and fog, exactly where your animals need them, through real seasons. Day and night, all by itself.
- 8smart plugs per controller
- ∞terrariums in one app
- 2,600+species in the catalog
How it works
Sensors measure, the controller decides, the plugs switch. JungleSIM is the controller and the sensors; your lights, heaters, pumps, foggers and any other devices stay. You set the targets once, in the app or on the device.
Sensors
Small wireless sensors for whatever your setup needs: the T1H for temperature and humidity, the W1L for the water level in your reservoir or overflow, the U1V for UVB, the M1S for soil moisture and the S1P temperature probe. Several per tank. To only see the readings, a T1H or M1S on your Wi-Fi is enough; to control devices you need a controller.
Controller
The S1M screen module is the heart of the system. Its e-paper display shows the climate at a glance and five buttons let you adjust it right at the tank. Prefer it hidden? The C1H control hub does the same without a screen.
Smart plugs
Up to eight Shelly plugs per controller (S1M or C1H) switch everything from ventilation and misting to heating, waterfalls and your own custom devices. Use the devices you already own or buy more in our shop.
Our suggestion
- S1M Screen module€134.10
- C1H Control hub€71.10
- T1H Temperature and humidity€35.10
- W1L Water level€35.00
- U1V UVB€29.00
- M1S Soil moisture€26.10
- S1P Temperature probe€19.00
- Shelly Plug M Gen3€15.90
- Shelly smart plugs (you have them)
- JungleSIM appAndroid, iOS coming
- Total
Small business owner, no VAT charged (§ 6 Abs. 1 Z 27 UStG).
The JungleSIM app
Everything about your terrarium in one place.
The climate at a glance
Every tank with its live temperature and humidity, the season it is in and who lives there. Feeding and cleaning are one tap away.
Every animal, in pictures
A photo album for every tank, animal and plant. Take a picture straight from the app and watch your frogs grow up.
Set the range, JungleSIM does the rest
Pick a target range for temperature and humidity. Heater, fans, mister, fogger and any other device only run when they are needed, and every plug can follow its own schedule.
Who lives where
List the species in every tank with photos, counts of males, females and juveniles, and the clean-up crew. The plants get their own list.
See what really happens at night
Compare day and night, follow a whole month, and put feedings, egg counts and plug hours on the same chart as the climate.
Real seasons, slowly
Rainy and dry seasons with gentle transitions over weeks. In the dry season rain, mist and fog thin out by themselves, just like in the wild.
Never miss a feeding
Feeding days, cleaning and your own reminders, plus a note when a reading leaves your limits or a device restarts after a power cut.
What every device uses
The plugs measure what your lights, heaters, pumps and other devices draw. See the watts right now, today and the last 30 days, per device.
Made by keepers, for keepers
- Safety cut-off
- If a reading reaches an unsafe value, JungleSIM switches the devices off until it is safe again.
- Alerts that matter
- Too hot, too dry, water too low, a sensor lost: you hear about it, after a delay you choose.
- Runs on its own
- Schedules and climate rules live on the controller. It keeps running without the app or the internet.
- Updates itself
- New firmware arrives over the air and rolls back by itself if anything goes wrong.
- Care log and reminders
- Feeding, cleaning and your own routines, with a reminder when they are due.
- Breeding and gallery
- Log clutches per species and keep a photo album for every tank and animal.
- Just the readings
- Only want to see what is happening in your terrarium? A T1H or M1S on your Wi-Fi is enough. To control devices, add an S1M or C1H.
- Plant mode
- One M1S per house plant: the app shows the soil moisture, notices each watering by itself and tells you when a plant needs water.
- Many tanks, one app
- Switch between terrariums, or run a whole rack from one controller.
- A sign on the glass
- “Do not tap on glass”, “Breeding: don’t disturb” or your own text, right on the display.
At a glance
| Plugs | Up to 8 Shelly smart plugs per controller (S1M or C1H), as many controllers and terrariums as you like |
|---|---|
| Plug functions | From ventilation and humidity to heating, waterfalls and your own custom devices |
| Sensors | T1H temperature and humidity, W1L water level for reservoirs and overflows, U1V UVB, M1S soil moisture, S1P temperature probe |
| Wi-Fi mode | T1H and M1S send their readings straight to the app over 2.4 GHz Wi-Fi, no controller needed; controlling devices needs an S1M or C1H |
| Controller | S1M screen module (e-paper display, five buttons, clock, SD card) or C1H control hub without a screen |
| App | Android, iOS coming |
| Species catalog | More than 2,600 animals and plants |
| Updates | Over the air, with automatic rollback |
Want JungleSIM in your terrarium?
JungleSIM is running in our own tanks today. Tell us about your setup and we will let you know when it is ready for yours.